154 found, showing page 9 of 11
3/8" x 1-3/4" Single-Hole Clevis Pin
Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Parts have a single hole to fit a cotter pin at one specific hitch point. Parts made of high-strength, corrosion-resistant, zinc-plated steel.
- Diameter: 3/8"
- Length: 1-3/4"
- Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis
- Commonly used on hitches and to replace bolts or rivets at connection points that require quick assembly/disassembly
- Parts have a single hole to fit a cotter pin
- Ideal for industrial applications
- Made of zinc-plated steel
View Details
Call for Price
3/8" x 2" Single-Hole Clevis Pin
Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Parts have a single hole to fit a cotter pin at one specific hitch point. Parts made of high-strength, corrosion-resistant, zinc-plated steel.
- Diameter: 3/8"
- Length: 2"
- Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis
- Commonly used on hitches and to replace bolts or rivets at connection points that require quick assembly/disassembly
- Parts have a single hole to fit a cotter pin
- Ideal for industrial applications
- Made of zinc-plated steel
View Details
Call for Price
3/8" x 3" Single-Hole Clevis Pin
Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Parts have a single hole to fit a cotter pin at one specific hitch point. Parts made of high-strength, corrosion-resistant, zinc-plated steel.
- Diameter: 3/8"
- Length: 3"
- Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis
- Commonly used on hitches and to replace bolts or rivets at connection points that require quick assembly/disassembly
- Parts have a single hole to fit a cotter pin
- Ideal for industrial applications
- Made of zinc-plated steel
View Details
Call for Price
7/16" x 2" Single-Hole Clevis Pin
Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Parts have a single hole to fit a cotter pin at one specific hitch point. Parts made of high-strength, corrosion-resistant, zinc-plated steel.
- Diameter: 7/16"
- Length: 2"
- Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis
- Commonly used on hitches and to replace bolts or rivets at connection points that require quick assembly/disassembly
- Parts have a single hole to fit a cotter pin
- Ideal for industrial applications
- Made of zinc-plated steel
View Details
Call for Price
7/16" x 3" Single-Hole Clevis Pin
Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Parts have a single hole to fit a cotter pin at one specific hitch point. Parts made of high-strength, corrosion-resistant, zinc-plated steel.
- Diameter: 7/16"
- Length: 3"
- Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis
- Commonly used on hitches and to replace bolts or rivets at connection points that require quick assembly/disassembly
- Parts have a single hole to fit a cotter pin
- Ideal for industrial applications
- Made of zinc-plated steel
View Details
Call for Price
1/2" x 3" Single-Hole Clevis Pin
Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis. Parts have a single hole to fit a cotter pin at one specific hitch point. Parts made of high-strength, corrosion-resistant, zinc-plated steel.
- Diameter: 1/2"
- Length: 3"
- Clevis pins are used to secure a clevis to a load by slotting through the holes on the prongs of the clevis
- Commonly used on hitches and to replace bolts or rivets at connection points that require quick assembly/disassembly
- Parts have a single hole to fit a cotter pin
- Ideal for industrial applications
- Made of zinc-plated steel
View Details
Call for Price
3/16" x 1-1/4" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 3/16"
- Length: 1-1/4"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
1/4" x 1-5/16" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 1/4"
- Length: 1-5/16"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
5/16" x 1-1/4" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 5/16"
- Length: 1-1/4"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
5/16" x 1-3/8" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 5/16"
- Length: 1-3/8"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
5/16" x 1-3/4" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 5/16"
- Length: 1-3/4"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
7/16" x 1-11/32" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 7/16"
- Length: 1-11/32"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
7/16" x 1-5/8" Lynch Pin
Lynch (or linch) pins are self-locking pins inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping out of place. Easy to insert and remove for quick disconnect applications. They are often used in various tractors joints and other automotive components.
- Size: 7/16"
- Length: 1-5/8"
- Prevents a wheel or other rotating part from sliding off
- Used in various tractors joints and other automotive components
- Low carbon steel material
View Details
Call for Price
1/4" x 1-1/4" Carbon Steel Detent Pin
Designed to secure the ends of round shafts most commonly used on tractors and other heavy equipment. The straight leg of the pin enters the hole while the cured leg presses down on the shaft for added security.
- Diameter: 1/4"
- Length: 1-1/4"
- Carbon steel construction
- Cotter less
- Zinc helps guard against corrosion
View Details
Call for Price
1/4" x 2" Carbon Steel Detent Pin
Designed to secure the ends of round shafts most commonly used on tractors and other heavy equipment. The straight leg of the pin enters the hole while the cured leg presses down on the shaft for added security.
- Diameter: 1/4"
- Length: 2"
- Carbon steel construction
- Cotter less
- Zinc helps guard against corrosion
View Details
Call for Price
